ABOUT

Solutions & Cases

Our Case
  • Molybdenum and tungsten manufactured by

    2019-11-1 · The paper of Kaserer et al. of the same research groups titled “Fully dense and crack free Molybdenum manufactured by Selective Laser Melting through alloying with carbon” published in the same special issue of the International Journal of Refractory Metals and Hard Materials (2019) reveals how the negative effects caused by oxygen can be prevented by alloying with carbon for achieving completely dense and crack free parts in the SLM of molybdenum and tungsten.

  • (PDF) Molybdenum and tungsten manufactured by

    Molybdenum and tungsten manufactured by selective laser melting: Analysis of defect structure and solidi fication mechanisms

  • Molybdenum and tungsten manufactured by

    Oxygen is responsible for defects in additively manufactured molybdenum and tungsten. • High oxygen content is introduced by oxidized powder surface and residual oxygen in building chamber. • Hot cracking and embrittled grain boundaries are caused by segregated oxygen. • Molybdenum/tungsten oxides were found at intergranular fracture surfaces. •

  • Molybdenum and tungsten manufactured by

    Braun J, Kaserer L, Stajkovic J, Leitz KH, Tabernig B, Singer P et al. Molybdenum and tungsten manufactured by selective laser melting: Analysis of defect structure and solidification mechanisms. International Journal of Refractory Metals and Hard Materials. 2019 Nov 1;84. 104999. https://doi.org/10.1016/j.ijrmhm.2019.104999

  • Molybdenum and its compounds Wiley Online Library

    Tungsten is a molybdenum antagonist. It inhibits the absorption of molybdenum and increases the excretion of molybdenum in the urine. It seems probable that tungsten can replace molybdenum in molybdenum-dependent oxidases and so inhibit the action of these enzymes (NTP 1997). The mechanism by which molybdenum induces lung tumours is not yet known.

  • Refractory Metals High Performance Metal Solutions

    Complex fabrications, assemblies, finished, semi-finished, and machined products manufactured from pure and alloyed molybdenum, tantalum, niobium, and tungsten refractory metal powders possess unique chemical and mechanical properties designed to enhance product performance. Inquire Now. Powders and mill products including plate, sheet, foil, wire,

  • Tungsten & Molybdenum Aerospace Parts and

    2011-10-11 · Tungsten & Molybdenum Aerospace Parts and Components Manufactured by Elmet. Here is a picture of an aircraft engine. Elmet Technologies is a leading manufacturer of tungsten and molybdenum parts and components for the aerospace industry.

  • US4291444A Process of manufacturing a tungsten

    A barrier layer of tungsten or tantalum is provided on said mandrel to preclude the molybdenum contamination and the coated mandrel can thereafter be dissolved from the uncontaminated tungsten filament coil in an acid mixture. US4291444A Process of manufacturing a tungsten lamp filament Google Patents.

  • Professional Porous Tungsten Manufacturer Mosten

    2021-3-2 · At present, the production process of porous tungsten is mainly: tungsten powder forming sintering porous tungsten.There are many factors affecting porosity of porous tungsten, such as powder size, shape, chemical

  • International Tungsten Suppliers in the UK

    Our high density tungsten heavy alloys are made from virgin powders, using modern powder metallurgy techniques. We aim for quality and excellent communication in our work, priding ourselves on our specialist experience and knowledge.

  • Tungsten Raw Material, Services, & Technical Support

    Choose shelf stock W (Tungsten), Mo (Molybdenum) or Ta (Tantalum) or have items made to order. Large inventory and short manufacturing lead times guarantee prompt delivery. Raw materials for sale include tungsten and tungsten heavy metal alloys, molybdenum, and tantalum. Raw material forms include rod, wire, sheet, plate, bar, nuts, and

  • GTP Global Tungsten & Powders Corp.

    Global Tungsten & Powders (GTP) develops, manufactures and markets refractory metal powders such as tungsten, tungsten carbide, molybdenum, and cobalt. GTP is a leading Western supplier with production facilities in the United States, Finland, and the Czech Republic. Think Tungsten

  • International Tungsten Suppliers in the UK

    Tungsten can be machined with little difficulty, and is a high density metal, being 65% denser than lead. It has a high softening temperature, as well as low thermal conductivity and a low coefficient of expansion, giving it a high resistance to thermal fatigue. It is strong at high temperatures and has a high thermal stability.

  • SELECTION OF DIE MATERIALS AND SURFACE

    2016-5-16 · tungsten hot work steels (H21 to H26) retain much of their hardness upto to 620°C. The properties of molybdenum based hot work steels is in between that of chromium based and tungsten based hot work die steels. Thermal and mechanical properties of various AISI standardized hot work tool steels is available in many books, hence have not been

  • What Does It Mean to be DFARS Compliant? Rembar

    2018-2-12 · Rembar stocks and precision-machines DFARS compliant tungsten, molybdenum, TZM and niobium (as well as domestically-produced and imported tantalum which is exempt from DFARS regulations). Contact our knowledgeable and experienced sales engineers today for a quote by filling out the form below or call us at (914)693-2620.

  • Tungsten: Properties, Production, Applications & Alloys

    2019-12-8 · Tungsten-steel alloys are also used in the production of rocket engine nozzles, which must have high heat resistant properties. Other tungsten alloys include Stellite (cobalt, chromium, and tungsten), which is used in bearing and pistons due to its durability and resistance to wear, and Hevimet, which is made by sintering a tungsten alloy powder and is used in ammunition,

  • X-Ray Production Sprawls

    2005-12-10 · In recent years an alloy of tungsten and rhenium has been used as the target material but only for the surface of some anodes. The anode body under the tungsten-rhenium surface on many tubes is manufactured from a material that is relatively light and has good heat storage capability. Two such materials are molybdenum and graphite.

  • DESIGN GUIDELINES FOR THE SELECTION AND USE OF

    Type 317 contains 3-4% molybdenum (higher levels are also available in this series) and more chromium than Type 316 for even better resistance to pitting and crevice corrosion. Type 430 has lower alloy content than Type 304 and is used for highly polished trim applications in mild atmospheres. It is also used in nitric acid and food processing.

  • List of Metal Alloys by Base Metal ThoughtCo

    2020-2-7 · An alloy is a material made by melting one or more metals together with other elements. This is an alphabetical list of alloys grouped according to base metal. Some alloys are listed under more than one element, since the composition of the alloy may vary such that one element is present in a higher concentration than the others.

  • Guide to Gunmetal

    2011-12-29 · Steel can be alloyed with other metals such as nickel, chromium and tungsten—as well as non-metallic elements as molybdenum, sulfur and silicon. Those alloying agents add useful things to the mix, such as easy machineability, corrosion resistance, abrasion resistance or tensile strength without brittleness to the steel grade in question